Open the paired devices tab.
Before pairing, decide on your own passcode (1-16
digits), and agree with the user of the other device to
use the same code. Devices that do not have a user
interface have a fixed passcode. You need the passcode
only when you connect the devices for the first time.
After pairing, it is possible to authorise the connection.
Pairing and authorising the connection makes
connecting quicker and easier, as you do not have to
accept the connection between paired devices every
time you establish a connection.
The passcode for remote SIM access must have 16
In remote SIM mode you can use your device's SIM card
with compatible accessories.
When the wireless device is in the remote SIM mode,
you can only use a compatible connected accessory,
such as a car kit, to make or receive calls.
Your wireless device will not make any calls, except to
the emergency numbers programmed into your
device, while in this mode.
To make calls, you must first leave the remote SIM
mode. If the device has been locked, enter the lock code
to unlock it first.
New paired device
. The device
starts to search for Bluetooth devices within range.
If you have sent data using Bluetooth connectivity
before, a list of the previous search results is
displayed. To search for more Bluetooth devices,
Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered in the other device as well.
To make the connection between your device and
the other device automatic, select
. To confirm
the connection manually every time a connection
attempt is made, select
. After pairing, the device
is saved to the paired devices page.
To give a nickname to the paired device, select
Assign short name
. The nickname is
displayed in your device.
To delete a pairing, select the device whose pairing you
want to delete and
. To delete all
. If you are
currently connected to a device and cancel the pairing
with that device, pairing is removed immediately, and
the connection is ended.
To allow a paired device to connect automatically to
your device, select
Set as authorised
between your device and the other device can be made
without your knowledge. No separate acceptance or
authorisation is needed. Use this status only for your
own devices, such as your compatible headset or
computer, or devices that belong to someone you trust.
If you want to accept connection requests from the
other device separately every time, select
To use a Bluetooth audio accessory, such as a Bluetooth
handsfree or headset, you need to pair your device
with the accessory. For the passcode and further
instructions, see the accessory user guide. To connect
to the audio accessory, switch on the accessory. Some
audio accessories connect automatically to your
device. Otherwise, open the paired devices tab, and
select the accessory and
Connect to audio